In the case of newborns within four months of birth, even if the temperature is a little low, the digestive absorption rate drops significantly, hiccups, vomiting, or diarrhea.
The reason why the baby’s milk powder burning temperature is 37 to 38 degrees Celsius in accordance with the mother’s body temperature is that the baby has been nourishing the mother’s body temperature for 10 months, so it is good for the baby to digest it.
Experienced mothers are well aware, but if you’ve been nursing for a certain period of time, you’ll have experienced avoiding your head so you won’t eat it when the baby is half of the bottle. The baby refuses to eat the leftover milk powder that has cooled down.
In the case of general baby bottles without a thermal function, there are many cases where they cannot be fully lactated and left behind. Even when you finish eating, you will experience diarrhea, stomachache, or vomiting.
Babies’ digestive organs are immature and have a nearly straight structure, so their digestive functions are very weak. Even if babies keep them warm, they can help with digestion a lot. Therefore, we developed this product and obtained a patent to create a happy nursing time for babies by reproducing functions such as the thermal function and the mother’s arms for baby health.
Our baby bottles have a warming effect of 3~7℃ for an average lactation time (about 25-30 minutes) compared to conventional baby bottles without silicone covers due to the thermal effect of the silicone cover air layer, which increases the baby’s digestion absorption rate, reduces hiccups and vomiting, and allows the baby to experience eating formula happily.
Soft silicone balloon baby bottles help develop EQ by giving the baby a sense of stability like a mother’s arms compared to hard conventional baby bottles.
When a mother returns to work or work after breastfeeding for a month or two, she has a hard time refusing baby bottles. However, silicone balloon baby bottles such as the mother’s chest greatly reduce baby bottle rejection.
When parents sometimes leave their babies at daycare centers, acquaintances, parents, etc., the babies are under great stress from separation anxiety. However, baby bottles like mothers’ chests, which were taken at home, greatly help relieve separation anxiety. Even after nursing, babies like to play with silicone balloon baby bottles like toys.
Soft silicone balloons naturally cause fingers to exercise, which greatly helps in tactile and small-muscle development, helping IQ development. (In infants, brain development is 90 percent complete by the age of 3, and the silicone balloon bottle’s finger movement-inducing effect helps babies’ brain develop.)
Silicone balloon baby bottles, which are reproduced like mother’s breast, make babies who like warmth and softness like baby bottles, accelerating the time to hold and eat themselves.
The silicone cover’s air injector makes it easy to insert and remove air, making it easy to use.
Due to these characteristics, we became the first in the world to obtain an invention patent.
Characteristics and Intentions of Baby Bottle Design
In the transition from breastfeeding to formula feeding, most babies reject the bottle and invariably require breastfeeding.
However, breastfeeding is a challenge that must be stopped at some point. One of the difficulties in raising babies, the milking process, can be easily solved through silicone balloon baby bottles.
The soft touch and warmth of the silicone cover allowed the baby to feel like a mother’s skin, and the soft touch gave the baby comfort so that he could find stability.
In order to prevent the silicone cover from swelling too round, the middle part of the silicone cover is designed to be thicker in a horizontal shape than other parts so that it can be easily held by a small baby hand.
By processing the surface of the silicone cover with a corrosion treatment method so that if it is held by the baby’s hand, the baby can feel the skin’s touch without slipping, so that the baby can hold and eat stably during the feeding time.The upper and lower ends of the silicon cover are in the form of fixed rings and are specially manufactured to prevent air from escaping even without a separate fixing device.
During feeding time, the injected air is maintained continuously, and despite the natural finger movement of the baby, the air injected into the silicone cover is maintained for a long time without being drained.
As an air layer of such a silicone cover, it is also excellent in maintaining warmth, and as a result of comparative testing with baby bottles without silicone covers, it is maintained at 5~7℃, increasing the baby’s digestion and absorption rate.
It is designed to prevent silicone balloon baby bottles from falling easily by installing a bottom hat that is easily fastened and detached at the bottom of the baby bottle.
Ergonomic features of baby bottles:
Although a silicone cover is attached, it is convenient to use a hot water sterilization and disinfection dryer with a silicone cover attached like a general baby bottle.
When the baby’s milk powder temperature drops, it can’t digest and hiccups, vomits, or even diarrhea, but by creating an air layer with a silicone cover, it increases the temperature insulation effect and greatly increases the baby’s digestion and absorption.
Compared to conventional silicone-free baby bottles, silicone-balloon baby bottles with silicone covers maintain a high temperature difference of 5 to 7 degrees when temperature changes are compared and tested for an average lactation time of 25 to 30 minutes.
The warm warmth of powdered milk reaches the silicone cover, giving the baby a sense of psychological stability with the same warmth as the mother’s chest, which makes feeding time enjoyable and increases emotional stability.
There are few tools for small muscle development for babies aged 4.0 to 1. It is the time when brain development is the most common between the ages of 0 and 1, and the silicone balloon baby bottle is almost the only tool for finger small muscle exercise that has the greatest effect on brain development. (See Montessori, Waldorf educational materials.)
Silicone balloon baby bottles, such as mothers’ chests, are good news for mothers who want to wean when they move from breastfeeding to baby bottle demand.
General silicone baby bottles have the disadvantage of not being able to see users well by embossing the scale into silicon itself, but this product makes a transparent window at the scale.
Three parts of the lower cap are embossed in a vertical shape to make it easy to open and close the lower cap without slipping when opening or locking it. The lower cap is locked without having to be turned multiple times, and it is simplified to be conveniently locked if you turn it slightly once.
eco-friendly consideration of baby bottles
All parts of this product are BPA FREE, where environmental hormones are not detected.
The packaging paper was also made to safely pack the baby product by using natural pulp rather than rehabilitation paper to ensure that there were no harmful ingredients.
In the case of glass baby bottles, silicon was coated on glass for fear of being broken, but this makes it difficult to recycle resources because it is difficult to discharge separately.
Our products are made so that the container and the silicone cover can be separated, so that only the silicone cover can be reused when the silicone cover is damaged, considering resource saving and consumer economy.
Characteristics of Formation (Shape) of Baby Bottle
The upper and lower ends were treated with silicone rings to facilitate the attachment of silicone covers to baby bottle containers, and the silicone rings are designed to keep air free from leaking even if a baby performs a lot of finger exercises.
When air is injected into the silicone cover, the size of the balloon of the silicone cover becomes too large and prevents it from becoming too round like a ball, and it is designed to maintain the shape of a long-shaped balloon by adjusting the thickness of the silicone cover to 0.6mm thick so that the baby can hold it well and eat milk powder.
The baby can hold and eat the silicone balloon, which is swollen in the shape of a janggu. The tight fit without slipping easily from the baby’s hand can give the baby psychological stability.
A corrosion method was adopted on the silicone cover to prevent slipping, and the logo was put on the top of the front and the center of the logo was polished to add an aesthetic sense to look beautiful.
If you ride powdered milk, you must look at the scale and burn an appropriate amount of powdered milk. In the existing silicone baby bottle, the shape of the scale is manufactured in the form of embossed or engraved, so it is difficult to see visually.
To improve this, we printed it out clearly, and designed the silicone cover not to have a scale engraved, but to have a wavy pattern on both sides so that the scale printed on the container can be seen clearly, so that the transparent window part can be seen clearly.